product details dimension a dimension b dimension c dimension d interface material finish thermal performance for more information, to fnd a distributor or to place an order, visit www.qats.com or call: 781.769.2800 (north america); +31 (0) 3569 84715 (europe). ats part # ATS-1043-C3-R0 features & benefts maxiflow tm cross cut high performance heat sinks with hardware attachment rev3_052912 air velocity thermal r esistance ( c/w unducted) ft/min m/s air flow straight air flow sideways 200 1.0 300 1.5 2.8 400 2.0 2.1 500 2.5 1.6 600 3.0 1.3 1.9 1.6 1.3 1.1 1.0 3.6 ? for larger heat sinks and higher pre-loads, push pins with compression springs are an effective mounting choice. the push pin has a flexible barb at the end that is designed to engage with a pre-drilled hole in a pwb. the compression spring adds the necessary force to hold the assembly together. provides better thermal performance than comparable size straight fin and pin fin heat sinks. ? features proven high performance maxiflow? heat sink spread fin array to maximize cooling surfaces. ? ideal for tight spaced components where wider heat sinks cant be used. ? provided with pre-assembled thermal interface material centered on base. ? pem stand-off with compression and screws. ? reccomended through hole size in pcb is 3.00 mm. not es: 1) dimension c = heat sink height from bottom of the base to the top of the fn feld. 2) thermal performance data are provided for reference only. actual performance may vary by application. 3) ats reserves the right to update or change its products without notice to improve the design or performance. 4) contact ats to learn about custom options available. *image above is for illustration purposes only. 20.02 .788 50.8 2.0 hole pattern b 41 mm 45 mm 25 mm 79 mm chomerics t766 green anodized dimension a dimension b dimension c dimension d interface material finish
|
